Site Test
Standard(s): BS 1377-9:1990
in-Situ Bulk Density Nuclear Method

The in-situ bulk density nuclear method is a non-destructive test used to determine the bulk density and moisture content of soil or compacted layers in earthworks. This test employs a nuclear density gauge, which uses radioactive isotopes to measure the density and water content of the material directly at the site.

Test Procedure:

  1. Preparation: The surface of the test area is leveled, and any loose material is removed to ensure proper contact between the gauge and the soil.
  2. Gauge Placement: The nuclear density gauge is placed on the prepared surface. A probe from the gauge is inserted into the material to a standard depth.
  3. Measurement: The gauge emits gamma rays to measure the material’s density and uses neutron scattering to determine its moisture content.
  4. Data Recording: The gauge provides real-time results for both bulk density and moisture content, which are recorded for analysis.

Importance in Construction:

This method is essential for ensuring that soil or other compacted materials meet the required density specifications for structural stability and load-bearing capacity. It is commonly used in road construction, embankments, and other large-scale earthworks where compaction quality directly affects the performance of the project.

Example: A contractor building a highway might use this test to confirm that the sub-base material meets the compaction standards required for long-term durability.

Back to all tests

View more Earthworks testing services:

View all
Earthworks

Dynamic Cone Penetration (TRL-DCP)

Lab Test
Site Test
Mobile Site Test
Rapid measurement of the in-situ strength of existing flexible pavements constructed with unbound materials.
Earthworks

In-Situ California Bearing Ratio (CBR)

Site Test
Mobile Site Test
Penetration of soil with a plunger over a standard area. The harder the surface, the higher the CBR percentage.
Earthworks

Constituents of Course Recycled Aggregates

Site Test
Ensure the quality and compliance of recycled aggregates with our constituents analysis, supporting sustainable and reliable construction practices.
Earthworks

Plasticity Index

Lab Test
Site Test
A higher Plasticity Index indicates a greater range of water content where soil remains plastic, signifying higher compressibility and potential for settlement.
Earthworks

Water Content

Lab Test
The Water Content Test measures the water content in soil to ensure proper compaction and stability for earthworks and construction projects.
Earthworks

in-Situ Bulk Density Nuclear Method

Site Test
The in-situ bulk density nuclear method ensures soil compaction meets construction standards by measuring density and moisture directly on-site.
Earthworks

Resistance to Fragmentation – Los Angeles Test

Lab Test
Subjects a coarse aggregate sample to abrasion, impact, and grinding.
Earthworks

Laboratory California Bearing Ratio CBR

Lab Test
Penetration of soil with a plunger over a standard area in the lab. The harder the surface, the higher the CBR percentage.
Earthworks

Water-Soluble Sulphate (WS)

Lab Test
Site Test
The Water-Soluble Sulphate Test measures sulphate levels in soil or aggregates to assess the risk of sulphate attack on concrete in construction projects.
Earthworks

Grading of Soils

Lab Test
The Grading of Soils test determines particle size distribution to assess soil suitability for construction, including compaction and permeability properties.
amtest logo white

AMTEST UK Ltd delivers top-tier services to civil engineering and infrastructure clients across the UK, backed by expert in-house concrete consultants.

Unit A 2D/6, Project Park, North Crescent, London E16 4TQ

Site Test
in-Situ Bulk Density Nuclear Method

The in-situ bulk density nuclear method is a non-destructive test used to determine the bulk density and moisture content of soil or compacted layers in earthworks. This test employs a nuclear density gauge, which uses radioactive isotopes to measure the density and water content of the material directly at the site.

Test Procedure:

  1. Preparation: The surface of the test area is leveled, and any loose material is removed to ensure proper contact between the gauge and the soil.
  2. Gauge Placement: The nuclear density gauge is placed on the prepared surface. A probe from the gauge is inserted into the material to a standard depth.
  3. Measurement: The gauge emits gamma rays to measure the material's density and uses neutron scattering to determine its moisture content.
  4. Data Recording: The gauge provides real-time results for both bulk density and moisture content, which are recorded for analysis.

Importance in Construction:

This method is essential for ensuring that soil or other compacted materials meet the required density specifications for structural stability and load-bearing capacity. It is commonly used in road construction, embankments, and other large-scale earthworks where compaction quality directly affects the performance of the project.

Example: A contractor building a highway might use this test to confirm that the sub-base material meets the compaction standards required for long-term durability.

BS 1377-9:1990